EPOXYPLAST 100 1.5 kg

CHF60.00

- +

Description

EPOXY EPOXYPLAST RESIN 100 P STRATIFICATION RESIN FLOW RESIN RESIN RESIN RESIN FOR GRP TERRA CARBON SOILS

Transparent RESINSE FOR ARTISTIC AND DOMICILE TRAVAUX – 1.6 KG Transparent epoxy system, UV-resistant and autonlanting that creates a hard, shiny protective layer. The surface is perfectly smooth and moisture-resistant. Epoxy resin without solvent and odour. applications: – artistic works, creation of art objects (paintings, panels, etc.) with the technique of “fluid art”; Cover surfaces, objects and furniture to give depth and brightness to colour; Creating a 3D effect on prints, photos and images in general The “ART-PRO” formula is specially designed for coating in the art industry. Compatible with dyes, powdered pigments, alcohol and oil-based dyes, aerosol paints. Warning: it can withstand moisture, do not use on wet surfaces or with water dyes (e.g. acrylics) Technical data Use rate 100: 60 (weight) Grass duration (150 g to 30 C): 1h20 ‘, Catalis in film (from 1 mm to 30 C) ) at 6:00 ‘. Complete Catalyst after 24 hours, To obtain a cellular effect, it is recommended to use the additive “Resin Blast” or alcoholic inks

TRANSPARENT RESIN FOR HOMEMADE ARTWORKS – 1.5 KG

A transparent, UV-resistant epoxy system that creates a hard, shiny protective layer.
The surface is perfectly smooth and moisture-resistant.

Epoxy resin without solvent and odour.

Applications:

– artistic works, creation of art objects (paintings, panels, etc.) with the technique of “fluid art”;

Cover surfaces, objects and furniture to give depth and brightness to colour;

Create a 3D effect on prints, photos and images in general

Securing loads (decorative elements, glass, stone, quartz, etc.)

Create a perfectly transparent protective layer on your creations

The “ART-PRO” formula is specially designed for coating in the art sector.

Compatible with dyes, powdered pigments, alcohol and oil-based dyes, aerosol paints.

Warning: may withstand moisture, not use on wet surfaces or with water dyes (e.g. acrylics)

Technical data
Use ratio 100: 60 (by weight)
Pot life (150g to 30c): 1 hour 20′,
Film catalyst (1 mm to 30 C): 6:00′.
Complete catalysis after 24 hours,

For a cellular effect, it is recommended to use the additive “Resin Blast” or alcohol inks

HTML Snippets Powered By : XYZScripts.com