Gas heat gun


- +


Gas heat gun

Manual gas thermal pistol with adjustable flame length and safety lock.
A great way to neutralize the bubbles that form when the resin is poured

ATTENTION! Avoid keeping the flame too close to the resin and don’t focus on the usual point (move it all over the surface). If the resin becomes too hot, a film may form on the surface.

The gun must be manually loaded with gas.

How to use:

Remove the cap from the container and insert it into the hole under the gun. Press and hold for about 20-30 seconds to fill the gun. During this procedure, it is normal for some of the gas to escape.

HTML Snippets Powered By :