SPRAY ANTIBULLE

CHF30.00

- +

Description

Spray correcteur Epoxy AB (anti-bulles)

Spray d’élimination des bulles de surface époxy

DIPON® EPOXY AB Anti-Bubble KORREKTOR Spray is a chemical solution for the efficient and rapid removal of bubbles from freshly poured epoxy resin surfaces. L’évent intégré aide à dissiper les cloques subséquentes après la première utilisation. ATTENTION! Le spray DIPON® EPOXY AB KORREKTOR does not eliminate bubbles or air inclusions less than the amount of repotting of epoxy resin.

DIPON® EPOXY AB Anti-Bubble KORREKTOR Spray is a chemical solution for the efficient and rapid removal of bubbles from freshly poured epoxy resin surfaces. The built-in degasser helps dissolve the subsequent bubble formation after the first application. WARNING: DIPON spray® EPOXY AB KORREKTOR does not remove bubbles or air inclusions below the amount of joining to epoxy resin.

An example video is available in the tabs under this description. You can find a video in the tabs under this description.

Content I contain: 400 ml

Spray correcteur Epoxy AB (anti-bulles)

Spray d’élimination des bulles de surface époxy

EPOXY AB Anti-Bubble KORREKTOR Spray is a chemical solution for the efficient and rapid removal of bubbles from epoxy resin surfaces. Built-in ventilation helps dissipate subsequent blisters after first use. WATCH OUT! EpOXY AB KORREKTOR spray does not eliminate bubbles or air inclusions less than the amount of epoxy resin repotting.

APPLICATION: Shake the aerosol can vigorously for about 15 to 30 seconds before use. EPOXY AB Anti-Bubble KORREKTOR Spray is sprayed in a thin, even layer on the wet surface at a distance of about 15-30 cm. Due to the application of thin spray mist, the epoxy bubble concealer is distributed throughout the room. Depending on the part to be worked, the wide jet nozzle or round jet nozzle for point spraying is used. EPOXY AB Anti-Bubble KORREKTOR SPRAY can only be used in well-ventilated rooms with an appropriate breathing mask.

ATTENTION! DO NOT USE A BURNER OR FLAME AFTER APPLYING THE EPOXY AB ANTI-BUBBLE CORRECTOR TO THE PREVIOUSLY SPRAYED SURFACE. RISK OF IGNITION AND FIRE!

DIPON® EPOXY AB Anti-Bubble KORREKTOR Spray is a chemical solution for the efficient and rapid removal of bubbles from epoxy resin surfaces. The built-in degasser helps dissolve the subsequent bubble formation after the first application. WARNING: EPOXY AB KORREKTOR Spray does not eliminate bubbles or air inclusions below the amount of joining to the epoxy resin. APPLICATION: Shake the spray vigorously for about 15 to 30 seconds before use. DIPON® EPOXY AB bubble sprayis sprayed finely and evenly on the wet surface at a distance of about 18. 15-30 cm. Due to the application of thin spray mist, the Epoxy Anti-Bubble Korrektor spreads throughout the room. Depending on the part to be machined, the wide jet nozzle is used or the round jet nozzle for spot spraying. The EPOXY AB bubble spray can only be used in well-ventilated rooms with an appropriate breathing mask.

WARNING: DO NOT USE THE POISONER OR FLAMME AFTER THE APPLICATION OF SPRAY Anti-Bubble Corrector EPOXY AB ON THE SURFACE TO PULVERISER BEFORE. DANGER OF IGNITION AND FIRE!

Safety guidelines:

Danger! Extremely flammable aerosol. H226 Liquid and flammable vapours. – H373 Suspected risk of serious organ effects as a result of repeated exposure or prolonged exposure. – H312 – H332 Harmful by skin contact or inhalation. – H315 Causes skin irritation. – H319 Causes severe eye irritation. – H335 May irritate the airways. – P210 Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Don’t smoke. – Keep the container closed. – P312 Call a CENTRE ANTIPOISON / a doctor in case of discomfort. – P332 – P313 In case of skin irritation: consult a doctor. – P403 – P235 Stocker in a well ventilated area. Keep one’s cool. DANGER:Protect from direct sunlight. Store in a fireproof area. Storage temperature < 20 degrees Celsius, keep away from ignition and heat sources. Storage space; Store in a cool, dry place. Protect from frost.

Safety guidelines:

Danger! Extremely flammable aerosol: Pressure container: can burst under the effect of heat. Protect from the sun. DANGER: H226 Liquid and flammable vapours. – H373 Suspected risk of serious organ effects as a result of repeated exposure or prolonged exposure. – H312 – H332 Harmful by skin contact or inhalation. – H315 Causes skin irritation. – H319 causes severe eye irritation. – H335 May irritate the airways. – P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Don’t smoke. – P233 Keep the container closed. – P312 If you feel unwell, call an ANTIPOISON CENTRE/medical service. – P332 – P313 In case of skin irritation: consult a doctor. – P403 – P235 Store in a well-ventilated area. Keep in a cool place. WARNING: Protect from direct sunlight. Store in a fireproof area. Storage temperature < 20 degrees Celsius, keep away from ignition and heat sources. Storage space; Store in a cool, dry place. Protect from frost.

Copyright. 2014 – 2020. DIPON.DE Removable Automotive Coatings GmbH and Co. KG

HTML Snippets Powered By : XYZScripts.com